Bush Hog® Lift Disc Harrows

1D Series

Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs.

FullSize_1D
Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • Adjustable gang angles, front and rear, using an easy-tograsp handle
  • Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series
  • Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2 in. front and rear gangs for finer soil finishing • 9 in. front gangs / 7 1/2 in. rear gangs–the best of both worlds

Construction Features

  • Square and rectangle tube steel frames and gang tubes
  • Self-aligning, sealed ball bearings
  • Notched disc blades for maximum cutting action
  • 1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series
  • Available in tractor colors
  • Optional disc scrapers

Product Features

BHDiscHarrowDSeriesInsert2

Bearing hangers reinforces with gussets

BHDiscHarrowDSeriesInsert1

Easy-to-grasp handle for simple gang adjustment

 

BH Disc Harrow D Series Insert 3

Notched discs for maximum cutting action

Good for Tractors rated 40hp or under

Specifications

Models
1D60
1D78
Hitch Type
Cat. 1 Std and QH
Max Cultivation Width
60 in.
78 in.
Approximate WT Load on Each Blade
35-38 lbs.
30-32 lbs.
Disc Blade Side Notched
6 in. or 18 in.
Disc Blade Spacing
9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear
Disc Blade Bearing
Self-aligning, sealed ball bearings
# of Blades
2 per gang
Forward Gang Angle Adjustment
Front Gangs – 0°, 7°, 14°, 21°
Rear Gang Angle Adjustment
Rear Gangs – 7°, 14°, 21°
Mainframe Fornt Tube Construction
2 in. square tubing
Gang Arm Construction
3 in. x 1 1/2 in. tubing
Gang Axle
1 in. square, high carbon steel
Disc Scrappers
Optional

Videos

 

 

Privacy Preference Center