The 160 Series Rear Blades is the ideal choice for heavy-duty grading chores around the farm such as road construction, terracing, dam building, and cleaning out feed lots.
These blades offer a choice of manual or hydraulic tilt, angle, and offset adjustments. Moldboard can be reversed for back filling. They are rated for use on a wide range of 2WD and 4WD tractors, depending on blade width.
With their heavy-duty construction, the 160 Series Blade is engineered and built to meet the most demanding conditions.
Place your mouse over the image to enlarge any portion of the product below.
NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
- 160 Series is available in 8 ft & 10 ft. operating widths.
- Tilt, Angle and Offset Adjustments
- Reversible Cutting Edge
- Standard Parking Stand
- Tubular Construction
- A Frame Construction
- Heavy-Duty King Pins
- Powder Coated Paint
- Heavy-Duty Mainframe
- High-Strength Reinforced Moldboard
|MOLDBOARD WIDTH||8 & 10 ft.|
|MOLDBOARD HEIGHT AND THICKNESS||18 in. x 1/2 in.|
|MOLDBOARD CUTTING EDGE||1/2 in. x 6 in.|
|HITCH||3-Pt. Cat. lI & III, Quick Hitch|
|APPROXIMATE WEIGHT||1339 lbs. (8 ft.), 1459 lbs. (10 ft.)|
|MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE||8 ft. 190 HP, 10 ft. 160 HP|
|MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST||8 ft. 160 HP, 10 ft. 135 HP|
|KING PIN DIAMETER||4 in.|
|TILT ADJUSTMENT||15º up or down (manual or hyd.)|
|OFFSET ADJUSTMENT||37 in. left or right (manual or hyd.)|
|ANGLE ADJUSTMENT||45º left or right (in forward and reverse position, manual or hyd.)|
|ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.|