Bush Hog®
SQ84T Multi-Spindle Rotary Cutters

SQ84T Squealer® with Twin Gearboxes and 9-inch offset.

The SQ84T is a lighter 7-feet twin spindle cutter for 25 to 50 PTO HP tractors. This close-coupled unit is ideal for small pastures and orchard maintenance. Cuts up to 1 1/2-inches diameter saplings.

No matter what your mowing or cutting needs, one of Bush Hog’s multi-spindle rotary cutters is the perfect choice… the right implement for your tractor and cutting requirements. The wide selection of models, sizes, cutting widths, and hitches offered by these rotary cutters makes it easy to select the perfect tool for your specific job and budget. And our offset versions are ideal for orchard work.

Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.


Performance Features
  • Bush Hog® Performance in an Economical Pasture Mower
  • 9-feet 9-inches Cutting Width
  • Rubber cushioned axles gives load protection when working on rough terrain.
  • Manual or hydraulic lift, single or dual axles on pull models.
  • High Blade Tip Speeds
  • Round blade pans are standard equipment.
Construction Features
  • Available In Lift, Pull & Semi-Mount
  • 5 Year Gearbox Limited Warranty
  • Floating A Frame HItch
  • Strongbacks are 7 gauge box steel
  • Drivelines are fully shielded and tough slip clutches standard on all models.
  • Deep side bands and high blade tip speeds assure better cutting performance.
  • Round blade pans are standard equipment.


Model SQ84T
Cutting Width: 7-feet
Cutting Capacity: Up to 1 1/2-inches Diameter
Cutting Height: 2 to 12-inches
Dimensions (width x length): 7-feet 3-inches x 6-feet 3-inches
Type Hitch: Category I Hitch 9 inch offset Lift only
Deck Thickness: 11-gauge
Side Bands: 7 3/8-inches x 11-gauge
Minimum Tractor HP 35–50 PTO
Driveline ASAE Category 3
Cross Shaft Rubber Element
Gearbox HP 60 Main 45 Outboard
Tractor PTO Speed; 540 RPM
Driveline Protection Slip Clutch
Height Adjustment Adjustable
Blade Holder(s) Oval type
Blades 1/2-inch x 4-inches uplift
Blade Tip Speed 11,500 FPM
Tires: Laminated
Axles Adjustable
Deflectors: Standard Front Belting and Rear Bands
Approximate Weight: 720-lbs.
Warranty: 1-year limited warranty with a 5-year gearbox limited warranty
Features: • Floating A Frame Hitch
• High Blade Tip Speeds