Bush Hog®
2010 Series Multi-Spindle Rotary Cutters

2010 Series (Pull, Lift or Semi-Mount)

The standard duty 2010 model cuts 9 ft. 9 inches width in heavy grass and weeds. It is available in models of Lift, semi-mount and pull.

No matter what your mowing or cutting needs, one of Bush Hog’s multi-spindle rotary cutters is the perfect choice… the right implement for your tractor and cutting requirements. The wide selection of models, sizes, cutting widths, and hitches offered by these rotary cutters makes it easy to select the perfect tool for your specific job and budget. And our offset versions are ideal for orchard work.

    Place your mouse over the image to enlarge any portion of the product below.

    NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.


    Performance Features
    • Bush Hog® Performance In An Economical Pasture Mower
    • 9-feet 9-Inches Cutting Width
    • Rubber cushioned axles gives load protection when working on rough terrain.
    • Deep side bands and high blade tip speeds assure better cutting performance.
    • Manual or hydraulic lift, single or dual axles on pull models.
    • High Blade Tip Speeds
    Construction Features
    • Available In Lift, Pull & Semi-Mount
    • 5 Year Gearbox Limited Warranty
    • Rear Sloped Deck
    • Quick-Detach Gearbox Shields
    • 7 Gauge Box Steel Strongbacks
    • Fully-Shielded Drivelines with Tough Slip-Clutches Standard
    • Round Blade Pans Standard

    Safety Features

    • Front Single Row Chains
    • Rear Single Row Chains or Metal Band
    Product Features


    Model 2010
    Cutting Width 9-feet, 9-inches
    Cutting Capacity 2-inches diameter
    Cutting Height 2 to 12-inches
    Dimensions (width x Length) 10-feet 3-inches x 9-feet 4-inches (Lift);10-feet 3-inches x 13-feet (Pull)
    Type Hitch 3-Point Cat. II & III Standard & QH; Center Pull Self-Leveling or Semi-Mount Cat. II & III
    Deck Thickness 11-gauge
    Side Bands 7-gauge x 10-inches
    Minimum Tractor HP 60 PTO (Lift), 40 PTO (Pull)
    Driveline ASAE Category 4
    Cross Shaft Rubber Element
    Gearbox HP 120 Main and 90 Outboard
    Tractor PTO Speed 540/1,000 RPM
    Driveline Protection Slip Clutch Slip Clutch 4 Plate PTO Slip Clutch
    Height Adjustment Choice of Manual Height Bundle or Hydraulic Cylinder
    Blade Holder(s) Round Pans
    Blades 1/2-inch x 4-inches – Corner Uplift
    Blade Tip Speed 15,778 FPM/540 RPM; 15,708 FPM/1000 RPM
    Blade Overlap 3-inches
    Tires Laminated Tire on Lift & Semi-Mount Models; Laminated Tire or Used Aircraft Tires on Pull Type Only
    Axles Adjustable Axle Arms for Row Spacing
    Deflectors Selection: Front Belting and Rear Bands or Chains
    Safety Tow Chain Standard for Pull Models
    Approximate Weight 1,922-lbs. (Lift); 2,177-lbs. (Pull); 1,929-lbs. Semi-Mount
    Warranty 1-year limited warranty with a 5-year gearbox limited warranty
    Features • Rear Sloded Deck
    • High Blade Tip Speeds
    • Deep Sidebands
    • Quick-Detach Gearbox Shields

    Literature & Manuals

    Other Downloads
    Discontinued Product Downloads

    Product Videos