The 100 Series Rear Blades are the ideal choice for heavy-duty grading chores around the farm such as road construction, terracing, dam building, and cleaning out feed lots.
These blades offer a choice of manual or hydraulic tilt, angle, and offset adjustments. Moldboard can be reversed for back filling. They are rated for use on a wide range of 2WD and 4WD tractors,
depending on blade width.
With their heavy-duty construction, the 100 Series Blades is engineered and built to meet the most demanding conditions.
Place your mouse over the image to enlarge any portion of the product below.
NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
- 100 Series is available in 8 ft. & 9 ft. operating widths.
- Manual or Hydraulic Tilt, Angle and Offset Adjustments
- Reversible Cutting Edge
- Standard Parking Stand
- Heavy-Duty Mainframe
- High-Strength Reinforced Moldboard
- Tubular Construction
- A Frame Construction
- Powder Coat Paint
- Heavy-Duty King Pins
|MOLDBOARD WIDTH||8 and 9 ft.|
|MOLDBOARD HEIGHT AND THICKNESS||17 in. x 3/8 in.|
|MOLDBOARD CUTTING EDGE||1/2 in. x 6 in.|
|HITCH||3-Pt. Cat. lI & III I Quick Hitch|
|APPROXIMATE WEIGHT||836 lbs. (8 ft.), 876 lbs. (9 ft.)|
|MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE||8 ft. 125 HP, 9 ft. 95 HP|
|MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST||8 ft. 105 HP, 9 ft. 80 HP|
|KING PIN DIAMETER||3 in.|
|TILT ADJUSTMENT||15º up or down (manual or hyd.)|
|OFFSET ADJUSTMENT||30 in. left or right (manual or hyd.)|
|ANGLE ADJUSTMENT||45º left or right (in forward and reverse position, manual or hyd.)|
|ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.|