THE MEDIUM-PLUS DUTY FLEX-WING
The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.
Place your mouse over the image to enlarge any portion of the product below.
NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
- Axle spindles are in halves for quick and economical service.
- Center section blades closely align with center section wheel to better cut the bottom of ditches.
- Grease fittings and steel bushings at axle pivot points for extended life.
- Wing free float without movement of wing hydraulic cylinder rod extends cylinder life.
- Optional distribution baffles spread grass and cornstalks to eliminate windrows.
- Improved wing design results in a clean top and no exposed structure underneath.
- Patented oil sight gauge in all three cutting gear boxes for quick and easy monitoring of oil levels.
- Safety Tow Chain Standard
|Cutting Height||2’ to 14”|
|Hitch||Perma Level Hitch|
|Minimum Tractor PTO||H.P. 60|
|Side Band||1/4” x 12”|
|Blades||1/2” x 4”|
|PTO Drivelines||ASAE Cat 6|
|Wing Drivelines||ASAE Cat 4|
|Wing Flex||22° down to 87° up|
|Wing Free Float*||22º down to 25º up|
|Splitter Gearbox Rating||250 H.P.|
|Cutting Gearbox Rating||210 H.P.|
|Gearbox Limited Warranty||5 Years|
|Blade Tip Speed||16,268 FPM|
|Cutting Capacity||3 1/2”|
|Axle Cushions||Springs at Each Axle Arm|
|Wing Adjustments||Heavy Duty Turnbuckle|
|Grass/Crop Distribution||Baffles, Optional|
|Safety Tow Chain||Standard|
|*Float without movement of hydraulic cylinder rod|
|2215 MODEL AND 1815 MODEL DIFFERENCES||2215||1815|
|Gearbox, Splitter, H.P.:||250||160|
|Gearboxes (3), H.P.:||210||130|
|Maximum Cutting Capacity:||3 1/2” diameter||2 1/2” diameter|
|Blade Tip Speed:||16,268 FPM||15,000 FPM|
|Main Axles:||Square tubes||Round tubes|
|Axle Cushions:||Springs on each axle arm||Rubber cushions on center axle arms|
|Hitch:||Perma Level, standard||Perma Level or Cast Clevis|